****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8.2 Release Date : Jun 19, 2008 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy282.xxx" is used for modem code Y.1.28.187. (Recommended for Taiwan, France or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi028.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va282.xxx" is used for modem code D.57.2.14. (Standard) 3> "v28vf282.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve282.xxx" is used for modem code E.38.2.23. (Recommended for UK and Netherlands and South Africa) 5> "v28vg282.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) 6> "v28vh282.xxx" is used for modem code E.67.2.40. (Try this one, if met dsl sync issue) 7> "v28vp282.xxx" is used for modem code E.67.2.52. (Try this one, if met dsl sync issue) 8> "v28vr282.xxx" is used for modem code E.67.2.55. (Try this one, if met dsl sync issue) 9> "v28vt282.xxx" is used for modem code E.67.36.1.(Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz282.xxx" is used for modem code A.27.4.14.(Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb282.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm282.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd282.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) 4> "v28vj282.xxx" is used for modem code E.74.2.22. (Try this one, if met dsl sync issue) 5> "v28vl282.xxx" is used for modem code E.74.2.26. (Recommended for Portugal ) 6> "v28vn282.xxx" is used for modem code E.74.2.32. (Try this one, if met dsl sync issue) 7> "v28vo282.xxx" is used for modem code E.74.2.35. (Try this one, if met dsl sync issue) 8> "v28vq282.xxx" is used for modem code E.74.2.48. (Try this one, if met dsl sync issue) [New Functions] - Support Trace Route and Ping Diagnosis functions for 3.5G connection. - Support Traffic Graph for 3.5G connection. - Support Bandwidth Limit function for 2nd subnet usage. - Support TFTP ALG. - Support TwoDNS in Dynamic DNS function. - Support new 3.5G modems: C-Motech D-50, CDU-550, Sierra 875U, ASUS T500 and OVATION MC950D - Add telnet command "Srv nat ipsecpass" for IPSEC NAT passthrough. [Improvements & Corrected Problems] - Improve ISDN loop through's echo problem. - Improve the stability for ISDN remote dial in. - Fix the problem that PPTP HOST-To-LAN can only set up 16 VPN connections. - Fix the problem that VoIP Peer to Peer call by dailing IP address cannot work with 3.5G connection. - Fix NAT not working issue when ISDN Backup is enabled. - Correct ADSL2+ Annex M online status in WUI. ****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8.1 Release Date : Febryart 11, 2008 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy281.xxx" is used for modem code Y.1.28.187. (Recommended for Taiwan, France or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi281.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va281.xxx" is used for modem code D.57.2.14. (Standard, Recommended for Australia ) 3> "v28vf281.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve281.xxx" is used for modem code E.38.2.23. (Recommended for UK , Netherlands and South Africa) 5> "v28vg281.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) 6> "v28vh281.xxx" is used for modem code E.67.2.40. (Try this one, if met dsl sync issue) 7> "v28vp281.xxx" is used for modem code E.67.2.52. (Try this one, if met dsl sync issue) 8> "v28vr281.xxx" is used for modem code E.67.2.55. (Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz281.xxx" is used for modem code A.27.4.14. (Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb281.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm281.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd281.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) 4> "v28vj281.xxx" is used for modem code E.74.2.22. (Try this one, if met dsl sync issue) 5> "v28vl281.xxx" is used for modem code E.74.2.26. (Try this one, if met dsl sync issue) 6> "v28vn281.xxx" is used for modem code E.74.2.32. (Try this one, if met dsl sync issue) 7> "v28vo281.xxx" is used for modem code E.74.2.35. (Try this one, if met dsl sync issue) 8> "v28vq281.xxx" is used for modem code E.74.2.48. (Try this one, if met dsl sync issue) [New Features] - Support PPPoE to PPPoA Pass-through function. [Improvements & Corrected Problems] - Improve ISDN and 3.5G backup mechanism with MPoA mode. - Improve PPPoE interoperability. - Improve the stability of Wireless. - Improve inbound QoS function in PPPoA mode. - Improve WAN IP Alias with NAT Open Port and Port Redirection. - Improve DDNS client's updating function. - Fix display error in the web page of Wireless station list. - Extend UPnP port mapping number from 10 to 30. - Support more 3.5G modems , supported modems will be listed on DrayTek web site. ****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8 Release Date : July 9, 2007 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy028.xxx" is used for modem code Y.1.28.187. (Recommended for Taiwan, France or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi028.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va028.xxx" is used for modem code D.57.2.14. (Standard) 3> "v28vf028.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve028.xxx" is used for modem code E.38.2.23. (Recommended for UK and Netherlands and South Africa) 5> "v28vg028.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) 6> "v28vh028.xxx" is used for modem code E.67.2.40. (Try this one, if met dsl sync issue) 7> "v28vp028.xxx" is used for modem code E.67.2.52. (Try this one, if met dsl sync issue) 8> "v28vr028.xxx" is used for modem code E.67.2.55. (Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz028.xxx" is used for modem code A.27.4.14. (Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb028.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm028.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd028.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) 4> "v28vj028.xxx" is used for modem code E.74.2.22. (Try this one, if met dsl sync issue) 5> "v28vl028.xxx" is used for modem code E.74.2.26. (Try this one, if met dsl sync issue) 6> "v28vn028.xxx" is used for modem code E.74.2.32. (Try this one, if met dsl sync issue) 7> "v28vo028.xxx" is used for modem code E.74.2.35. (Try this one, if met dsl sync issue) [New Features] - Support 3G USB Modem Backup. [Improvements & Corrected Problems] - Add the patterns of KAD network(eDonkey) and iMesh7(FastTrack) for P2P Blocking function. - Add EOC information of CPE on modem code E67.2.55 ,E74.2.26,E74.2.32 and E74.2.35. - Improve ISDN call function. [Notes] - The Hauwei E220, Option GlobeSurfer iCON, 4G System XSPlug P3, Zapp Telemodem Z020 and Telstra Next G 3G USB Modem are verified. The future supported modems will be listed on DrayTek web site. ****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.7.2 Release Date : June 8, 2007 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy272.xxx" is used for modem code Y.1.28.187. (Recommended for Australia, Taiwan, France or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi272.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va272.xxx" is used for modem code D.57.2.14. (Standard) 3> "v28vf272.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve272.xxx" is used for modem code E.38.2.23. (Recommended for UK and Netherlands and South Africa) 5> "v28vg272.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) 6> "v28vh272.xxx" is used for modem code E.67.2.40. (Try this one, if met dsl sync issue) 7> "v28vp272.xxx" is used for modem code E.67.2.52. (Try this one, if met dsl sync issue) 8> "v28vr272.xxx" is used for modem code E.67.2.55. (Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz272.xxx" is used for modem code A.27.4.14. (Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb272.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm272.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd272.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) 4> "v28vj272.xxx" is used for modem code E.74.2.22. (Try this one, if met dsl sync issue) 5> "v28vl272.xxx" is used for modem code E.74.2.26. (Try this one, if met dsl sync issue) 6> "v28vn272.xxx" is used for modem code E.74.2.32. (Try this one, if met dsl sync issue) 7> "v28vo272.xxx" is used for modem code E.74.2.35. (Try this one, if met dsl sync issue) [New Features] - Add new option "post dial" for Hotline. - Add assignable ring port for ISDN Loop-through. - Support MSN number for ISDN Loop-through. - Support Annex M in modem code E.38.2.23, E.67.2.12, E.67.2.40, E.67.2.52 and E.67.2.55. - Support WAN IP Alias in Port Redirection rule. [Improvements & Corrected Problems] - Extend the length of Authentication Username to 64 characters in Mail Alert Setup. - Improve the interoperability of Telnet command "ppp_mss" in Static IP mode of MPoA. - Change to ISDN provider's suggestion DNS Server when ISDN Backup is active. - Correct the issue that 802.1X with WEP mode cannot work. - Extend the MAC Address Control to 64 entries in Wireless General Setup. - Improve wireless VLAN. - Improve ISDN Loop-through performance. [Known issues] 1. ADSL Multimode issue. - The Multimode of modem code E38.2.23 can sync in G.Lite, G.DMT, ADSL2 and ADSL2+. (Without T1.413) - The Multimode of modem code E67.2.12 can sync in G.Lite, G.DMT, T1.413, ADSL2 and ADSL2+. (All Modulation) - The Multimode of modem code E67.2.40, E67.2.52 and E67.2.55 can only sync in G.Lite,G.DMT and T1.413. (ADSL Mode Only) 2. Wireless setting issue. - There is an interoperability issue if wireless security setting is mixed mode (WEP or WPA/WPA2-PSK) and clinet is Vigor610 or others with sample chipset (Ralink RT2571 or RT2561). [Note] - The maunal of the above new functions can be found on http://www.draytek.com. ****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.7.1 Release Date : October 11, 2006 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy271.xxx" is used for modem code Y.1.28.187. (Recommended for Australia, Taiwan, France or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi271.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va271.xxx" is used for modem code D.57.2.14. (Standard) 3> "v28vf271.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve271.xxx" is used for modem code E.38.2.23. (Recommended for UK and Netherlands and South Africa) 5> "v28vg271.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) 6> "v28vh271.xxx" is used for modem code E.67.2.40. (Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz271.xxx" is used for modem code A.27.4.14. (Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb271.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm271.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd271.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) 4> "v28vj271.xxx" is used for modem code E.74.2.22. (Try this one, if met dsl sync issue) 5> "v28vl271.xxx" is used for modem code E.74.2.26. (Recommended for Portugal, or try this one if met dsl sync issue) [New Features] - Add "TCP ACK Prioritize" on QoS. - Add "Traffic Graph" function on WUI. - Add "ISDN Loop-Through" on Digit Map. [Improvements & Corrected Problems] - Improve the PPPoE compatibility. - Improve the DHCP interoperability on MPoA. - Improve the wireless WDS stability. - Improve X.509. - Improve the PPP stability on ISDN. - Allow Web/Telnet management from VPN. ****************************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.7 Release Date : June 6, 2006 Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG, Vigor2800VGi ****************************************************************************************** [Release Firmware] (1)For Annex A Model - standard ADSL 1> "v28vy027.xxx" is used for modem code Y.1.28.187. (Recommended for Australia or ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vi027.xxx" is used for modem code D.16.2.1. (Recommended for Italy, Belgium and Sweden) 2> "v28va027.xxx" is used for modem code D.57.2.14. (Standard) 3> "v28vf027.xxx" is used for modem code D.79.42.14. (Recommended for Finland) 4> "v28ve027.xxx" is used for modem code E.38.2.23. (Recommended for the UK, Netherlands and South Africa) 5> "v28vg027.xxx" is used for modem code E.67.2.12. (Try this one, if met dsl sync issue) (2)For Annex B Model - standard ADSL 1> "v28vz027.xxx" is used for modem code A.27.4.14. (Recommended for ADSL) - standard ADSL/ADSL2/ADSL2+ 1> "v28vb027.xxx" is used for modem code E.11.2.19. (Standard) 2> "v28vm027.xxx" is used for modem code E.74.2.3. (Try this one, if met dsl sync issue) 3> "v28vd027.xxx" is used for modem code E.74.2.11. (Try this one, if met dsl sync issue) [New Features] - Support ISDN on-net/off-net function for connecting ISDN and VoIP network on Vigor2800VGi. - Support ISDN loop-through function to use the analog pohone to dial/receive ISDN call on Vigor2800VGi. - Support Wireless VLAN. - Add Bandwidth Management (limit session and limit bandwidth). - Add Data Flow Monitor function. [Improvements & Corrected Problems] - Add telnet command "adsl maxdnrate [value]" to set maximum downstream rate for ADSL. - Add switch settings for syslog message. - Add Wake on LAN, Ping Diagnosis and Trace Route functions. [End of File]